Your position: Home / Consumer Electronics / Audio & Video Devices / Microphone / Wireless Microphone

Podcasting Condenser Microphone with Anti Vibration Shock Mount Stand

    Please select the information you wantX
(300 available)
Shipping Cost:
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Reviews
Using a patented technology coated vibrating sound head and a special sound head structure design.
The product of high sensitivity, low noise, wide dynamic range.
The shell is madeof zinc alloy, the mesh is made of flexible heat-treatment technology.
The condenser microphone with a good cardioid polar pickup pattern, high output, low self-noise, and the accurate reproduction of even the most subtle sound.
The suspension scissor arm stand is made of durable steel material. It can be sturdily mounted on the announcers' table with the table mounting clamp.
The microphone wind screen filter or anti-wind cap cover protects your microphone from surplus spit / saliva,and helps get your best vocal recordings.
The shock mount is made of solid material and reduce the trill caused by vibration effectively.
Suitable especially for studios, recording studios, broadcasting stations, stage performances and computer. 
Absolutely fulfil the requirement of high quality for broadcasting and recording.

Tum on your amplifier or mixing board and set the volume control to minimum, to connect the phantom power to the microphone turning on phantom switch, accom-modate the volume control from low to high so obtained effect to your moderate level for protected the sauna from pounding.
If the dead of the microphone is covered by hand or brought close to the speaker, a houling sound may be generated. To prevent this, frist decrease the volume, then place the microphone so that it is not pointed to the speaker and that there is a sufficient distance between the microphone and speaker.
The sensitivity of cartridage is very fine, don't drop, hit or apply strong shock to it.
To maintain the sensitivity and quality of sound reproduction, avoid exposing it to mositure and extreme temperatures.
Material: Zinc alloy
Polar Pattern: Uni-directional
Frequency Response: 40Hz~16kHz
Sensitivity:-48dBC±2dB(0dB=1V/Pa at 1kHz) 
Output lmpedance: 250Ω±30%(at 1kHz)
Load lmpedance: ≥1000Ω
Equivalent noiselevel: 16dBA
Max. SPL: 130dB(at 1KHz≤1%T.H.D)
S/N Ratio: 78dB
Electrical current: 3mA
Microphone output interface: 3.5mm
Thickness of table for bracket installation: within 47mm
Length of bracket: approx. 70cm
Microphone Dimension: 155 x 44 mm
Packaged Included:
1 x Podcasting Condenser Microphone
1 x Microphone Suspension Scissor Arm Stand
1 x Table Mounting Clamp
1 x Anti Vibration Shock Mount
1 x Microphone Filter
1 x Foam Protective Anti-wind Cap Cover
1 x 3.5mm XLR Low Noise Microphone Cable ( 8.2ft/2.5m) 

Average rating:
Share your thoughts with other customers
Write a review